Ohio motorcycle accident injury prevention – Prep your bike

This post was written by Anneke on December 30, 2009
Posted Under: Ohio motorcycle accidents

Who: Swanton, Ohio motorcycle riders

What: Preparing your motorcycle for winter

Where: Swanton, Ohio

Our Swanton, Ohio motorcycle accident lawyers want to provide readers with the final tips on preparing your motorcycle for winter, in order to prevent an Ohio motorcycle accident injury in the spring.

Read the final two tips, compliments of www.totalmotorcycle.com:

9. Service all fluids

If the brake or clutch fluids haven’t been changed in the last two years or 18,000 km (11,000 miles), do it now. The fluids used In these system are “hygroscopic” which means that they absorb moisture. The contaminated fluid will cause corrosion inside the systems which may give problems when the motorcycle is used next spring. Be sure to use the correct fluids and note the warnings and instructions in the service manual. If you don’t have the experience to service these systems, contact your dealer, he will be happy to assist you.

If your motorcycle is liquid cooled, the coolant requires changing every two years or 24,000 kms (15,000 miles). Make sure that the engine is cool enough to rest your hand on it before draining the system and please dispose of the coolant responsibly. Coolant/antifreeze is available from your dealer and has been developed to provide the correct protection for your motorcycle engine. Mixed 50/50 with distilled water will ensure a clean system for the next two years or 24,000 kms (15,000 miles).

10. Cover it.

Now you can cover the bike with the cycle cover and look forward to the first warm day of spring.

Back On The Road

Before you head out onto the highway, there are a couple of things to do. First, remove the cover and put it where you can find it again. Talking of finding things, locate the (charged) battery and reinstall it connecting the positive (+) cable (red) before the (-) negative and covering the terminals with the plastic covers. Recheck all fluid levels and turn on the fuel. Check for anything wrong on the motorcycle (cracked tires, broken parts/plastic, leaking oil). Set the tire pressures back to riding specs and you are ready to fire up.

As you don your riding gear, remember that your riding skills will be a little rusty and the road surfaces will have changed a bit since the last ride, so go carefully. Sand/salt deposits on the edge of the road and especially at corners may be hazardous.

If you or someone you know has been injured in an Ohio motorcycle accident, contact our Ohio motorcycle accident lawyers at 800.637.8170 for your free copy of The Ohio Motorcycle Accident Book today.

Add a Comment

required, use real name
required, will not be published
optional, your blog address